Fischer Measurement Technologies India Private Limited
Pune, Maharashtra
GST 27AAACF9487H1Z6
TrustSeal Verified
Approx. Rs 4.5 Lakh / Piece
Our electrical conductivity measurement instrument - sigmascope SMP350 is designed with utmost precision to measure the electrical conductivity of metallic conductor accurately and precisely. Our sigmascope SMP350 is also used for assessing hardness and strength of various heat treated materials. Electrical conductivity is a basic material property which gives information about metal's ability for conducting electrical current.
Rapid and simple on-the-spot conductivity measurement of non-ferromagnetic metals acc. to DIN EN 2004-1 and ASTM E 1004
Windows® CE operating system, high-resolution touchscreen with virtual keypad
Conductivity probes for a wide range of applications
Different measurement frequencies from 15 kHz up to 1 MHz depending on the probe
Automatic temperature compensation of the conductivity (integrated or external sensor)
Automatic curvature compensation for a known curvature diameter (down to 6 mm)
We offer certified traceable calibration standards (MS/m, %IACS). Our probes were calibrated with these standards
FISCHER is the acknowledged supplier of certified calibrations standards for the European Mint
Technical data
Measurements pursuant to ASTM E 1004 and DIN EN 2004-1
Measurement frequencies ranging from 15 kHz to 1 MHz, depending on the probe
Measurement range: 0.5 – 65 MS/m or 1 – 112% IACS
Measurement precision at ambient temperature: ±0.5% of reading
Operating temperature: 0 – 40 °C
Lift-off compensation to 500 μm
Smallest diameter measurement area without noticeable influence on the reading: 13 mm
Connector for electrical conductivity probe, with or without integrated temperature sensor
Connector for optional temperature sensor TF100A
USB communication and printer port
Power supply via battery or mains electricity
Our sealing quality test – anotest is weather resistant and designed in compliance with the DIN EN ISO 12373-5 and ASTM B 457-67 standards. It is basically a sealing quality tester of anodic coatings on aluminum. It is equipped with LCD display which shows the readings accurately in no time. This sealing quality test – anotest is designed with utmost precision by our professionals using superb quality material and advance machines.
Large LCD
Battery or AC line operated
Automatic measurement start after insertion of the probe in the cell
Automatic computation of the admittance referenced to standard sizes
Signaling for poor sealing (e.g., Y > 15 μS)
Acoustic signal for start and end of measurement
Automatic shut-off
Storing of 10,000 measurements in up to 100 applications
Statistical evaluation
Display selectable in 8 languages
RS232 interface for printer or PC
Technical data
Statistical evaluation of measurement series with mean value, standard deviation, max and min value, range
Computation of the process capability indices cp and cpk
Output of characteristic variance analytical values
Graphical measurement presentation as a histogram with a Gaussian bell curve
Approx. Rs 6 Lakh / Piece
Feritscope FMP30 is extensively used in different industries to measure ferrite content in steel. It helps in maintaining the grades steel as excess or deficit of ferrite can lead the adverse impact on the quality of steel. If the ferrite content in steel is too high, the ductility and toughness as well as corrosion resistance of the steel is undermined and if it lacks then it will result in hot-cracking of weldment. Thus the test of ferrite content is necessary because the structures made of steel are generally exposed to aggressive media, high pressure and heat in process engineering, power and chemical plants.
Instrument features
User-friendly operation menu
Multiple language selections
Large, easy to read colour display
Robust housing
Non-destructive measurement of the ferrite content in a range from 0.1 to 80 % Fe or 0.1 to 110 FN
Units of measurement switchable between WRC-FN and % Fe
Automatic probe recognition
Sliding cover for keypad; however, On/Off and evaluation keys remain accessible at all times
Protection of settings though lockable keypad
Battery or line operation
Automatic instrument shut-down or continuous operation
Data memory
Up to 20,000 readings and 100 applications for mea surement data and application specific calibrations
Separation of the measurement data in up to 4,000 blocks
Date and time stamp for the blocks
Evaluation
Statistical evaluation of measurement series with mean value, standard deviation, max and min value, range
Computation of the process capability indices cp and cpk
Output of characteristic variance analytical values
Graphical measurement presentation as a histogram with a Gaussian bell curve
Interfaces
USB port for data transfer to a PC or printer
Optional Bluetooth® module, interface for wireless data transfer to a PC (up to 10 m)
Optional COM module, serial interface for data transfer to a PC or printer (cable length up to 12 m)
Calibration
Only one calibration required for the entire relevant measurement range from 0.1 to approx. 90 FN. Adherence to the measurement accuracy specified in standard ANSI/AWS A4.2M/A4.2:1997
Calibration using calibration standards traceable to TWI secondary standards or customer specific standards
Linking applications: Common normalisation/ calibration of applications
We use our years of industrial experience in providing porosity testing instrument HV40 which is ideally suitable for testing of electrostatically chargeable objects. This porosity testing instrument HV40 is equipped with various user friendly options for adjustable detection sensitivity. It is used to protect coating and material on which coating is done from foreign objects, cracks and pores which can come up with the corrosion on the material
Maximum safety with high voltage generation directly in the probe head and low-energy voltage according to ISO 2746
Three versions with different test voltage ranges:
HV5: 0.8 – 5 kV
HV20: 4 – 20 kV
HV40: 8 – 40 kV
Intuitive operations with menu navigation, rotary push switch and OLED display
Extensive selection of electrodes
Display of the test voltage applied directly to the electrode Pore detection sensitivity: detection threshold settable to a voltage drop of 10, 20, 30 or 50 %
Porosity detector switchable between static and dynamic threshold
Battery operation by means of a Li-ion battery with smart battery technology, a controller monitors the battery state permanently and avoids deep discharge
We will contact you soon !
Rakesh Bhan
(Managing Director)
Fischer Measurement Technologies India Private Limited
Hinjawadi, Pune,
Maharashtra,
India